Recommended Free Tools
Your Xiaomi phone’s ability to connect to the internet via mobile data, send MMS messages, and sometimes even make calls relies heavily on correct APN (Access Point Name) settings. An APN acts as a gateway between your mobile network and the public internet, essentially telling your phone how to connect to your carrier’s network. If these settings are incorrect or corrupted, you might experience issues like “no internet access,” slow data speeds, or inability to send/receive picture messages.
The concept of APNs dates back to the early days of GPRS (General Packet Radio Service) and EDGE (Enhanced Data rates for GSM Evolution) technologies, which allowed for packet-switched data transfer over mobile networks. As mobile technology evolved through 3G, 4G LTE, and now 5G, the underlying principle of APNs has remained crucial. While most SIM cards automatically configure these settings when inserted, sometimes manual intervention is needed, especially when using a new carrier, an international SIM card, or experiencing persistent data issues. MIUI, Xiaomi’s custom Android-based operating system, provides a straightforward path to manage these critical settings.
Why You Might Need to Change APN Settings
While often automatically configured, there are several common scenarios where you might need to manually change or add APN settings:
- No Mobile Data: This is the most common reason. Your phone might show a signal but cannot connect to the internet.
- Slow Data Speeds: Incorrect APN settings can sometimes lead to suboptimal network performance.
- MMS Issues: Inability to send or receive picture messages (MMS) is frequently due to incorrect MMS-specific APN parameters.
- New SIM Card/Carrier: When you insert a SIM from a new carrier, especially an MVNO (Mobile Virtual Network Operator), the automatic configuration might fail.
- International Roaming Issues: Sometimes, specific APN settings are required for roaming data.
- Troubleshooting: As a general troubleshooting step for persistent mobile data problems.
How to Change APN Settings in MIUI: Step-by-Step Guide
Shopping ad
- USA MARKET ONLY WORK ON TMOBILE BOOST MINT TELLO OR ANY UNDER TMOBILE NETWORK PHONE NEEDS A SIM CARD ALREADY ACTIVATED ,OUTSIDE USA WORKS ANY GSM CARRIER SIM GSM FCC ID: 2AFZZPC0AG
- Dual SIM (nano SIM + nano SIM or nano SIM + eSIM) (NO MICRO SD) 5G: 5G SA: n1/2/3/5/7/8/20/26/28/38/40/41/66*(70M)//77/78/485G NSA: n1/3/5/7/8/20/28/38/40/41/66*(70M)/77/784G LTE TDD: B38/40/41/42/484G LTE FDD: B1/2/3/4/5/7/8/18/19/20/26/28/66*(70M)/713G WCDMA: 1/2/4/5/6/8/192G GSM: 2/3/5/8Supports 4x4 MIMO*5G SA/NSA N66(70M) and 4G B66(70M): UL 1710MHz～1780MHz, DL 2110MHz～2180MHz*5G connectivity may vary based on region availability and local operator support.
- 6.83" 1.5K 120Hz ultra-bright AMOLED displayResolution: 2772 x 1280Contrast ratio: 8,000,000:1Refresh rate: Up to 120Hz*Refresh rate can be adjusted to up to 120Hz for supported apps.Peak brightness: 3500 nits covering 25% display areaHBM brightness: 2000 nitsTypical brightness: 800 n: 2560Hz*480Hz touch sampling rate is activated under Game Turbo Mode.*2560Hz instant touch sampling rate is activated under Game Turbo Mode.12-bit color depth, 68 billion colorsDCI-P3 wide display 2.0HDR10+TÜV Rheinland Low Blue Light (Hardware Solution) CertifiedTÜV Rheinland Flicker Free CertifiedTÜV Rheinland Circadian Friendly CertifiedDolby VisionCorning Gorilla Glass 7i
- MediaTek Dimensity 9500s3nm manufacturing process1 x Cortex-X925, up to 3.73GHz3 x Cortex-X4, up to 3.3GHz4 x Cortex-A720, up to 2.4GHzImmortalis-G925 MC11NPU 890 - 8500mAh (typ)100W HyperChargeUSB Type-C charging portUp to 27W reverse chargingSupports PD3.0/PD2.0Smart charging
- Wi-Fi Protocol: Wi-Fi 7/ Wi-Fi 6/ Wi-Fi 5/ Wi-Fi 4 and 802.11a/b/g*Wi-Fi 7/Wi-Fi 6 capability may vary based on regional availability and local network support. Wi-Fi connectivity (including Wi-Fi frequency bands, Wi-Fi standards and other features as ratified in IEEE Standard 802.11 specifications) may vary based on regional availability and local network support. The function may be added via OTA when and where applicable.WLAN frequency: 2.4G Wi-Fi | 5G Wi-FiSupports Multi-Link Operation, 2x2 MIMO, 8x8 Sounding for MU-MIMO, Wi-Fi Direct, MiracastBluetooth 6.0, Dual-BluetoothSupports SBC / AAC / LDAC / LHDC 5.0 / LC3 / ASHA / AuracastNFC
The process for accessing and modifying APN settings in MIUI is quite consistent across different versions (e.g., MIUI 12, MIUI 13, MIUI 14).
Step 1: Access Mobile Networks Settings
- Open Settings: Tap the “Settings” app icon on your home screen or in your app drawer. It’s usually a gear icon.
- Navigate to “SIM cards & mobile networks”: Scroll down and tap on “SIM cards & mobile networks.” This is the central hub for managing your cellular connections.
Step 2: Select Your SIM Card
- Choose the SIM: In the “SIM cards & mobile networks” screen, you will see a list of your SIM cards (if you have a dual-SIM phone). Tap on the SIM card for which you want to change the APN settings.
Step 3: Go to Access Point Names (APN)
- Tap “Access Point Names”: On the selected SIM card’s settings page, look for and tap on “Access Point Names” (often abbreviated as “APNs”).
Step 4: Add or Edit APN
Now you’ll see a list of existing APN profiles. You can either edit an existing one or create a new one. It’s generally recommended to create a new APN profile if you are unsure, rather than modifying a working one, as you can always revert.
- To Create a New APN:
- Tap the “New APN” button, usually represented by a “+” icon or “New APN” text at the bottom or top of the screen.
- To Edit an Existing APN:
- Tap on the existing APN profile you wish to modify.
- Note: Some default APN profiles cannot be edited directly, only viewed. In such cases, you must create a new one.
Step 5: Enter the APN Details
This is the most critical step. You will need to enter specific information provided by your mobile carrier. Refer to your carrier’s official website or customer support for the exact APN settings. Common fields you might need to fill include:
Shopping ad
- USA MARKET ONLY WORK ON TMOBILE MINT TELLO OR ANY UNDER TMOBILE NETWORK PHONE NEEDS A SIM CARD ALREADY ACTIVATED ,OUTSIDE USA WORKS ANY GSM CARRIER SIM GSM FCC ID: 2AFZZRA29G
- Dual SIM (nano SIM + nano SIM or nano SIM + eSIM) NO MICRO SD SLOT. 5G: n1/2/3/5/7/8/12/20/26/28/38/40/41/48/66/77/78 - 4G: LTE FDD: 1/B2/B3/B4/B5/B7/B8/B12/B13/B17/B18/B19/B20/B26/B28/B32/B66 4G: LTE TDD: B38/B40/B41/B42/B48 - 3G: WCDMA: B1/B2/B4/B5/B6/B8/B19 - 2G: GSM: B2/B3/B5/B8
- 6.83" AMOLED displayResolution: 1.5K (2772 x 1280)Refresh rate: Up to 120HzTouch sampling rate: Up to 480HzInstantaneous touch sampling rate: 2560Hz*Activated in Game Turbo modeBrightness: 3200 nits peak brightnessBrightness: HBM 1800 nitsColor depth: 12bitContrast ratio: 8000000:1DCI- P3 wide color gamut447PPICorning Gorilla Glass Victus 2Sunlight displayHDR10+ | Dolby Vision16,000-step automatic brightness adjustment3840Hz PWM dimming｜TÜV Rheinland Low Blue Light (Hardware Solution) Certified | TÜV Rheinland Circadian Friendly Certified | TÜV Rheinland Flicker Free Certified
- MediaTek Dimensity 7400-Ultra4nm manufacturing process technologyCPU: Octa-core processor, up to 2.6GHzGPU: Mali-G615
- 200MP main cameraOptical Image Stabilization (OIS)0.56μm, 16in1, 2.24μmf/1.77P lens1/1.4" sensor size8MP ultra-wide cameraf/2.2Rear camera video recording4K at 30 fps1080p at 30/60 fps720p at 30 fps / Front Camera 20MP front camera1/4" sensor sizef/2.24P lensFront camera video recording1080p at 30/60 fps720p at 30 fps
- Name: A descriptive name for the APN (e.g., “Jio Internet,” “Airtel GPRS”). This is for your reference only.
- APN: The actual access point name (e.g., jionet, airtelgprs.com). This is crucial.
- Proxy: Usually left blank (Not set).
- Port: Usually left blank (Not set).
- Username: Sometimes required, often for older plans or specific services (Not set).
- Password: Sometimes required (Not set).
- Server: Usually left blank (Not set).
- MMSC: For MMS messages (e.g., http://mms.vodafone.co.uk/servlets/mms).
- MMS Proxy: For MMS messages.
- MMS Port: For MMS messages.
- MCC (Mobile Country Code): Usually auto-filled (e.g., 404 for India). Do not change unless instructed.
- MNC (Mobile Network Code): Usually auto-filled (e.g., 00 for Jio, 04 for Airtel in India). Do not change unless instructed.
- Authentication type: Often “PAP” or “CHAP” or “PAP or CHAP.” Your carrier will specify.
- APN type: Crucial for defining the purpose of the APN. Common values are:
- default (for internet)
- supl (for GPS assistance)
- mms (for multimedia messages)
- dun (for tethering)
- default,supl,mms (a common combination for all)
- APN protocol: Usually “IPv4” or “IPv4/IPv6.”
- APN roaming protocol: Usually “IPv4” or “IPv4/IPv6.”
- Bearer: Specifies the network technology (e.g., “Unspecified,” “LTE”). Often left “Unspecified.”
Example (Generic, always verify with your carrier):
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
| Field | Example Value (for a typical Internet APN) |
| Name | My Carrier Internet |
| APN | https://www.google.com/search?q=internet.carrier.com |
| Proxy | Not set |
| Port | Not set |
| Username | Not set |
| Password | Not set |
| Server | Not set |
| MMSC | Not set (unless for MMS) |
| MMS Proxy | Not set (unless for MMS) |
| MMS Port | Not set (unless for MMS) |
| MCC | (Auto-filled, e.g., 404) |
| MNC | (Auto-filled, e.g., 00) |
| Authentication type | None or PAP |
| APN type | default,supl |
| APN protocol | IPv4/IPv6 |
| Bearer | Unspecified |
Export to Sheets
Step 6: Save and Activate the New APN
- Save the APN: Once you’ve entered all the necessary details, tap the “More” or three-dot menu (top right) and select “Save.”
- Activate the APN: You will be returned to the list of APN profiles. Tap the radio button next to the newly created or edited APN to select and activate it. A green or blue dot/check mark will appear next to the active APN.
- Restart Phone (Recommended): After selecting the new APN, it’s often a good practice to restart your Xiaomi phone. This helps the device register the new settings properly.
Troubleshooting APN Issues After Changes
- Still No Internet/Slow Data:
- Double-check every single character of the APN settings against your carrier’s official information. A single typo can break the connection.
- Try selecting a different APN profile if available, then switch back to your desired one.
- Toggle “Mobile data“ off and on from your quick settings panel.
- Try resetting your network settings (Settings > Connection & sharing > Reset Wi-Fi, mobile networks, and Bluetooth).
- MMS Not Working: Ensure you have the correct MMSC, MMS Proxy, and MMS Port settings specifically for your carrier’s MMS service. These are usually separate from the internet APN settings or included as part of a combined APN type (default,supl,mms).
- Contact Carrier Support: If you’ve tried everything and still face issues, contact your mobile carrier’s customer support. They can often diagnose network problems on their end or provide the most up-to-date APN settings.
Changing APN settings is a vital skill for troubleshooting mobile data issues on your Xiaomi phone. By following these steps and ensuring accuracy, you can quickly restore or optimize your mobile internet connection.
FAQ
Q1: What are APN settings and why are they important on my Xiaomi phone?
Shopping ad
- International Model - No Warranty in US. USA ONLY COMPATIBLE WITH TMOBILE / MINT, TELLO GLOBAL VERSION . ****** Does NOT Work With Verizon Sprint Boost Metro Pcs At&t Cricket ***** . Unlocked Worldwide . - FCC ID: 2AFZZPNFAG
- Dual Nano sim 5G + eSIM (No micro SD support): 5G: Supports NSA + SA5G: 5G SA: 1/2/3/5/7/8/12/20/25/26/28/38/40/41/48/66/75/77/78 5G NSA: n1/3/5/7/8/20/28/38/40/41/66/75/77/78: 4G: LTE FDD: B1/2/3/4/5/7/8/12/13/17/18/19/20/25/26/28/32/66 4G: LTE TDD: B38/39/40/41/42/48: 3G: UMTS: B1/2/4/5/6/8/192G: GSM: B2/3/5/8 Supports 4x4 MIMO
- Leica Summilux optical lensVARIO-SUMMILUX 1:1.62-3.0/15-115 ASPH.Leica 23mm main camera50MPLight Fusion 900 image sensor2.4μm 4-in-1 Super Pixelf/1.62OIS23mm equivalent focal lengthLeica 115mm super telephoto camera50MPf/3.0OIS115mm equivalent focal lengthLeica 15mm ultra-wide camera12MPf/2.215mm equivalent focal lengthFOV 120° Rear camera video recording8K (7680x4320) video recording at 30fps4K (3840x2160) video recording at 30 fps, 60 fps, 120 fps1080p (1920x1080) HD video recording at 30 fps, 60 fps720p (1280x720) HD video recording at 30 fpsSlow motion video:720p 120fps, 240fps, 960fps1080p 120fps, 240fps, 960fps.
- 6.83" 144Hz eye-care displayFlat displayCorning Gorilla Glass 7iLIPO technology: Low-injection Pressure Over-moldingPeak brightness: 3200nits covering 25% display areaMaterial: AMOLEDResolution: 2772 x 1280, 447ppiRefresh rate: Up to 144Hz refresh rate*Touch sampling rate: 480Hz touch sampling rate, 2560Hz instantaneous touch sampling rate*Color gamut: DCI-P3Color depth: 68 billion colorsDC dimmingOriginal color PRO | Pro HDR | Wet touch technologyHDR10+ CertifiedTÜV The screen supports a maximum refresh rate of 144Hz. .*2560Hz instantaneous touch sampling rate needs to be activated in Game Turbo mode
- MediaTek Dimensity 9400+3nm manufacturing processCPU:1 x Cortex-X925, up to 3.73GHz3 x Cortex-X4, up to 3.3GHz4 x Cortex-A720, up to 2.4GHzGPU:Immortalis-G925 MC12 - AI:NPU 890
APN (Access Point Name) settings are configurations that tell your Xiaomi phone how to connect to your mobile carrier’s network for mobile data, sending MMS messages, and sometimes even calls. They act as a gateway to the internet and are crucial for cellular connectivity.
Q2: Why would I need to manually change APN settings in MIUI?
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Repair Windows errors before they cause bigger problemsFix Now →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →You might need to manually change APN settings if you experience “no internet access” despite having a signal, slow data speeds, issues sending/receiving MMS messages, or if you’ve inserted a new SIM card (especially from an MVNO) and the settings didn’t auto-configure correctly.
Shopping ad
- USA MARKET ONLY WORK ON TMOBILE MINT TELLO OR ANY UNDER TMOBILE NETWORK PHONE NEEDS A SIM CARD ALREADY ACTIVATED ,OUTSIDE USA WORKS ANY GSM CARRIER SIM GSM FCC ID: 2AFZZRN76L
- SIM1 + Hybrid* (SIM or MicroSD), supports dual 4G : 4G: 1/2/3/4/5/7/8/20/28/ 4G: LTE TDD: Band 38/40/41 3G: WCDMA: Band 2/4/5/8 2G: GSM: Quad Band.
- 6.67" AMOLED displayResolution: 2400 × 1080Refresh rate: Up to 120HzTouch sampling rate: 240HzBrightness: 1800nits peak brightnessBrightness: HBM 1200 nits (typ)Color depth: 8 bitContrast ratio: 5,000,000:1100% DCI- P3 wide color gamutPPI 394Corning Gorilla Glass 5Sunlight displayReading mode960Hz PWM dimming｜TÜV Rheinland Low Blue Light Certification (Hardware solution) | TÜV Rheinland Circadian Friendly Certification | TÜV Rheinland Flicker Free CertificationSGS Low Blue Light Certification
- Helio G99-Ultra6nm manufacturing process technologyCPU: Octa-core processor, up to 2.2GHzGPU: Mali-G57 MC2
- Proximity sensor | Ambient light sensor | Accelerometer | Electronic compass | IR blaster | Gyroscope / Bluetooth 5.3Wi-Fi Protocol: 802.11a/b/g/n/ac / Supports 2.4GHz Wi-Fi | 5GHz Wi-Fi Supports Wi-Fi Direct
Q3: Where do I find the correct APN settings for my carrier?
The most accurate and up-to-date APN settings for your mobile carrier can be found on their official website (often in the support or FAQ section) or by contacting their customer support directly. It’s crucial to get these details precisely correct.
Q4: Should I edit an existing APN or create a new one?
Free tools Windows power users keep installed
One-click scans. No signup required.
Shopping ad
- International Model - No Warranty in US. USA ONLY COMPATIBLE WITH TMOBILE / MINT, TELLO GLOBAL VERSION . ****** Does NOT Work With Verizon Sprint Boost Metro Pcs At&t Cricket ***** . Unlocked Worldwide . - FCC ID: 2AFZZPNFAG
- Dual Nano sim 5G + eSIM (No micro SD support): 5G: Supports NSA + SA5G: 5G SA: 1/2/3/5/7/8/12/20/25/26/28/38/40/41/48/66/75/77/78 5G NSA: n1/3/5/7/8/20/28/38/40/41/66/75/77/78: 4G: LTE FDD: B1/2/3/4/5/7/8/12/13/17/18/19/20/25/26/28/32/66/71 4G: LTE TDD: B38/39/40/41/42/48: 3G: UMTS: B1/2/4/5/6/8/192G: GSM: B2/3/5/8 Supports 4x4 MIMO
- Leica Summilux optical lensVARIO-SUMMILUX 1:1.67-3.0/15-115 ASPH.Leica 23mm main camera50MPLight Fusion 9502.4μm 4-in-1 Super Pixelf/1.67OIS23mm equivalent focal lengthLeica 115mm periscope telephoto50MPf/3.0OIS115mm equivalent focal lengthLeica 15mm ultra-wide camera12MPf/2.215mm equivalent focal length120º FOV Rear camera video recording8K (7680 x 4320) video recording at 30fps4K video recording at 120fps p (190+ (1280 x 720) video recording at 30fpsLog video recording up to 4K at 30fps, 60fpsSlow-motion video recording:- 720p at 120fps, 240fps, 480fps, 960fps, 1920fpootSteady
- 6.83" 144Hz eye-care AMOLED displayCorning Gorilla Glass 7iResolution: 1.5K, 2772 x 1280, 447 PPIRefresh rate: Up to 144Hz refresh rate*Touch sampling rate: Up to 480Hz, 3500Hz instantaneous*Color gamut: 100% DCI-P3Color depth: 12bit, 68 billion colorsBrightness: 600 (typ), 2000 (HBM)Peak brightness: 3500nits (UHBM) @APL25 dimmingOriginal color PRO | Pro HDR | Wet Touch Technology 2.0 | Xiaomi Vision Care*HDR10+, Dolby VisionTÜV Rheinland Low Blue Light (Hardware Solution) CertifiedTÜV Rheinland Flicker Free CertifiedTÜV Rheinland Circadian Friendly CertifiedTÜV Rheinland Intelligent Eye Care Certified
- MediaTek Dimensity 95003nm processCPU:1 x C1-Ultra, up to 4.21GHz3 x C1-Premium, up to 3.5GHz4 x C1-Pro, up to 2.7GHzGPU: Mali G1-UltraAI: NPU 990
It’s generally recommended to create a new APN profile if you are unsure or troubleshooting. This way, if the new settings don’t work, you can easily switch back to the original, default APN profile.
Q5: What are the most common APN fields I need to fill in?
The most crucial fields are Name (for your reference) and APN (the actual access point name provided by your carrier). For MMS functionality, you’ll also need to correctly fill in MMSC, MMS Proxy, and MMS Port. Other fields like Username, Password, and Server are often left “Not set” unless specifically required by your carrier.
Q6: Do I need to restart my Xiaomi phone after changing APN settings?
Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallOutdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchWhile not always strictly necessary for the changes to take effect, it is highly recommended to restart your Xiaomi phone after changing or activating new APN settings. This helps the device properly register the new configurations with the network.
Q7: My mobile data is still not working after changing APN settings. What else can I try? A7:
Quick Recap
- Double-check every character of the APN settings for typos.
- Toggle “Mobile data” off and on.
- Try selecting a different APN profile and then switching back.
- Consider resetting your network settings (usually found under Settings > Connection & sharing > Reset Wi-Fi, mobile networks, and Bluetooth).
- If all else fails, contact your mobile carrier’s customer support for further assistance.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.
